Test separator SKD962
<p>• SKD962 turret sorter is used for taping of discrete devices, IC devices, etc. It has the capability of high-speed testing, marking and taping. It uses DDR motors imported from Japan to ensure stable performance and high UPH output. Integrate the marking system and image system to bring high-quality product output to customers</ p> <p>• The nozzle has shielding function and automatic height correction function</ p> <p>• Automatic feeding (vibrating disc device): vibrating disc feeding, fast and stable</ p> <p>• Inspection: the machine is equipped with 5 electrical tests, 1 3D test, efficient direction discrimination and optical and electrical performance test, which greatly improves the excellence rate</ p> <p>• Main rotary table: the main rotary table is equipped with 18 suction nozzles driven by servo motor, which can accurately deliver the product through the suction nozzle to the center of each station</ p> <p>• Guiding/steering device: accurate positioning and reversing of products, with positioning error of 0.005mm and direction accuracy of 0.1 degree</ p> <p>• Marking disk mechanism: the marking disk can complete laser marking, dust suction, marking visual inspection and other functions, greatly speeding up the marking speed</ p> <p>• Tape making component: in addition to simple automatic tape making, it also has the function of automatic feeding and sealing image detection</ p> <p>• Image inspection function after sealing (optional)</p>
Test Sorting Equipment
Contact Us
Product Description

The dual display can rotate 270 °, and the front and back can be operated for easier control

The downforce motor adopts servo motor, which has fast response, stability and high accuracy

DFN testing device has good insulation, high testing accuracy, long service life and convenient maintenance
model | SKD962 |
Suitable for devices | SOT235/6/SOT23/SOT553/SOT563/SOT323/SOT363/SOT89/SOT223/SOD123/SOD323/SOD123FL/SOD323FL/SMA/SMB/SMC/MBS/SMAF/SMBF/SOP8/SOP10/SOP12/SOP14/SOP16/MSOP8/DEN2×2~DFN8×8/QFN2x2~QEN8×8/PDFN3.3×3.3~PDEN5×6 |
Maximum capacity | 45000 (test time less than 30ms) (psc/h) |
Test station | Support 6-station test |
Contact type | Fragment type/probe type |
classification | 4+4+1 |
Feed | Vibrating disc |
Discharge | Taping |
Machine stability | MTBA>60minutes MTTA<30sec MTBF> 168Hours |
pressure | 0.4-0.7MPa |
vacuum | ≥65KPa |
Power Supply | AC220V 50/60Hz |
Marking machine parameters | Vibrating disc Tape weaving 10W laser marking machine; Marking range: 110mm × 110mm0mm × 70mm carving speed:~7000mm/s; Minimum character: 0.5<%=contentpcontent131221%> 3 ; Output power: 0-10W, continuously adjustable |
Image parameters | Camera and resolution: 400000 CCD camera (H640 x V480 pixels)/160000 CCD camera (H1280 x V1080 pixels) Accuracy: 0.012mm/pixel; Cycle time:<35ms |
Bus program | High precision, fast speed, open all servo parameter settings, facilitate equipment debugging and monitoring MTBA original data records, equipment operation logs, servo alarm codes and information and other data to permanently save data |
Station | Station 18 |

Related products